PAM8610 Mini 10W+10W Stereo Audio Power Amplifier Board Module w/ Volume Control

Description

2 Channel * 10 Watt PAM8610 Class D Stereo Audio Power Amplifier Module Board with Power and Mute Switch Connectors and Volume Control Potentiometer
This PAM8610 module is a 10W, class-D stereo audio amplifier. It offers low THD+N, allowing it to achieve high-quality sound reproduction, all in a compact form factor. It can operate from a 9V or 12V power supply or batteries, and includes a power switch and mute switch connectors, a volume control potentiometer and speaker connector screw terminals for ease of use.
It can be used in any DIY design requiring a miniature audio amplifier, especially portable and mobile applications operating on battery power.
Features:
Can operate on any voltage from 7.5V to 15V, conveniently powered with a 9V or 12V power supply or battery
High efficiency: 90%
Provides 10W (left channel) + 10W (right channel) output power into an 8Ω speaker load and 12V power supply
CMOS class D amplifier design for high efficiency and low cost
Screw terminals for easy speaker connection - no soldering needed
Noise canceling circuit built into the amplifier board
Power on / off without popping noise
Includes power switch and mute switch connectors (wire external SPST switches to these connectors to provide remote power on/off and mute) and an onboard volume control potentiometer
Module has short-circuit current protection, under-voltage lockout and over-temperature protection (shuts down at an internal temperature of 140C +/- 15C)
Specifications:
Audio input connector: 3.5mm stereo headphone jack
Remote power and mute switch connectors: JST-style pins with 2.54mm (0.1") pin pitch
Output power: 10W + 10 W (8Ω)
Frequency response: 20Hz to 50KHz
Amplifier class: D
Operating voltage: 7.5 - 15V DC
Recommended DC supply voltage: 12V at ~2.5A, the connector center PIN is +
Quiescent Current: 20mA
Efficiency: 90%
Speaker Load: 4-8 Ohms, 8 Ohms recommended, screw terminal connectors
Size: 40 x 40 x 22 mm (L x W x H);  55 x 40x 22 including volume control knob
Volume control potentiometer shaft diameter: 6mm
Net weight: 24g
This module has floating outputs, therefore the left and right channel "negative" connections should not be connected together. The
module is designed to drive speakers, it will not work with headphones, which usually share a common ground between the two channels.
Package Contents:
1 x PAM8610 10W+10W Class D Stereo Audio Power Amplifier Module with Volume Control
Link to online installation and usage instructions
Get it faster! Stocks and ships from our US Colorado office for quick delivery.
We provide FREE USPS First Class Shipping with Tracking - Not Economy Shipping